Home
Produits Instruments de laboratoire Eau de laboratoire Puro - Qualité eau de grade primaire (type III)
1.jpg

Puro Primary Grade Type 3 Water

Using high recovery reverse osmosis (RO ) technology, Puro efficiently removes up to 99% of contaminants from mains feed water to produce primary grade water. Puro is a small footprint solution to feed glass washers or other laboratory equipment. Puro is suitable for Type 3/ RO water usage of 10-1000 litres per day. RO water is suitable for feeding glass-washers, autoclaves, steam generators and stability chambers, also to feed ultrapure water systems such as Alto. The integral boost pump simplifies installation and avoids unexpected costs or reduced flow rates due to poor inlet pressure. Puro is fed directly from your mains water supply.
Demander un devis
Introduction
Informations de commande
Produits recommandés

Introduction

Informations produit

ENVIRONMENTALLY FRIENDLY
Puro has up to 50% recovery of water dueto the innovative configuration of the RO membrane resulting in less waste water.
After the final conductivity measurement, water not meeting the required standard is recycled back around the system rather than sent to the drain.

Caractéristiques

* Make-up rates range from 10-80 litres per hour
* Novel recirculation loop extends membrane life
* Mount on the bench, wall or on top of the reservoir
* Choice of storage reservoir: 30, 60 or 100 litres
* One easy to change pre-filter

Informations de commande

Cat. No. RO Make-up Rate (Litres/hour) Water type Inorganics Rejcetion Rate (MΩ-cm) Feed Pressure (bar) Bacteria Rejection Rate (%) Oragnics Rejection Rate (%) Volume (mm) Weight (kg)
PUR000010 10 TypeⅢ Water 1-15 0.1-6 >99 >99 510*490*290 25
PUR000020 20 Type Ⅲ Water 1-15 0.1-6 >99 >99 510*490*290 25
PUR000050 50 Type Ⅲ Water 1-15 0.1-6 >99 >99 510*490*290 25
PUR000080 80 Type Ⅲ Water 1-15 0.1-6 >99 >99 510*490*290 25

Produits recommandés

Retour à la page précédente