Product Biological Laboratory Consumables Liquid Handling and Storage Pipets

Open End Pipets

Specifications: 1.0 mL 2.0 mL 5.0 mL 10.0 mL
Packaging: Packaging: Bulk Individual Package (Paper/Plastic) Individual Package in Bag (Paper/Plastic)

Get Quotation

Introduction

Product Information

Order Information

FAQ

Recommended Products

Introduction

Product Information

The open end pipets are suitable for rapid suction of a certain volume of liquid during experiments, and are also able to suck up larger tissue blocks. They are widely used in the fields of tissue culture, and clinical and scientific research.

Features a wide orifice for fast fluid suction or for suction and transfer of larger tissue pieces

Pipets of each specification are equipped with a filter element, which can prevent the sample, as well as aerosol or water vapor, from entering the pipette, prevent impurities in the pipet from contaminating the sample, and prevent cross-contamination

Features

* Designed with a wide tip; a variety of capacities and specifications are available
* The pipet tail is marked with different color codes, making is easy to identify the pipet range and model
* The pipet of each specification is equipped with a filter element, which can prevent the sample, aerosol or water vapor from entering the pipet controller, prevent impurities in the pipet controller from contaminating the sample, and prevent cross-contamination
* Designed with dual graduations to facilitate the identification of pipetting volumes. Negative graduations enhance pipet capacity and satisfy requirements for larger volumes
* The graduation is clear and accurate, with an accuracy up to ±2% of the total volume
* The optimized pipet tail is compatible with most kinds of pipet controller with rubber adapters available on the market
* Available in bulk packaging and individual packaging, which can be torn off or penetrated for easy operation; bulk packaging is easy to use in batches, reducing packaging waste
* Each package bag is printed with lot No. for quality traceability
* Irradiation sterilization, SAL 10^-6
* DNase/RNase-free, non-pyrogenic

Material

* Pipet Body: Polystyrene (PS)
* Pipet Filter: Polyolefin (PO)
* Conforming to USP Class VI standards

Product Information

Catalogue

Jet Biofil ENG Catalogue 2025

Download File

Order Information

Open End Pipets, Bulk Vacuum Packaged

Cat. No.	Volume (mL)	Graduation (mL)	Length（mm）	Color Code	Material	Sterile	Package	Qty. Per Bag	Qty. Per Case

GSP312005	5	1/10	319.0	Blue	PS	Y	Paper/Plastic	25	500
GSP312010	10	1/10	308.5	Orange	PS	Y	Paper/Plastic	25	500

Open End Pipets, Individually Packaged (Paper/Plastic)

Cat. No.	Volume (mL)	Graduation (mL)	Length（mm）	Color Code	Material	Sterile	Package	Qty. Per Bag	Qty. Per Case
Cat. No.	Volume (mL)	Graduation (mL)	Length（mm）	Color Code	Material	Sterile	Package	Qty. Per Bag	Qty. Per Case
GSP310001	1	1/10	270.0	Yellow	PS	Y	Paper/Plastic	1	500
GSP310002	2	1/100	270.0	Green	PS	Y	Paper/Plastic	1	500
GSP310005	5	1/10	319.0	Blue	PS	Y	Paper/Plastic	1	500
GSP310010	10	1/10	308.5	Orange	PS	Y	Paper/Plastic	1	200

Open End Pipets, Individually Packaged in Bag (Paper/Plastic)

Cat. No.	Volume (mL)	Graduation (mL)	Length（mm）	Color Code	Material	Sterile	Package	Qty. Per Bag	Qty. Per Case

GSP311005	5	1/10	319.0	Blue	PS	Y	Paper/Plastic	50	200
GSP311010	10	1/10	308.5	Orange	PS	Y	Paper/Plastic	50	200

FAQ

FAQ about liquid treatment supplies

* What kind of process does the ultra-low adsorption product belong to? Is that silane treatment?

The ultra-low adsorption products of Jet Biofil are not treated with silane. With the improvement of polypropylene resin materials and the use of ultra-smooth polishing and molding technology, the ultra-low adsorption product can achieve zero chemicals addition on the surface to reduce the combination of samples and surfaces and reduce sample loss.

* Can ultra-low adsorption products be sterilized?

No, they can’t. If you need sterile products, you can buy the corresponding sterilized ones. But the ultra-low adsorption surface may be affected if the customer self-sterilizes, finally affecting the service performance.

* Can the products with the filter tips be sterilized?

* Are the graduations on the serological pipets accurate?

The accuracy of all the serological pipets is measured at full volume. The accuracy is ±2% of the total volume

* What is the rubber plug in the serological pipet used for?

The rubber plug can prevent the liquid from splashing or sucking back into the pipet to some extent, avoiding the aerosol diffusion and cross contamination among the samples.