|
カタログ番号
|
説明
|
滅菌
|
未稀釈
|
点/袋
|
点/箱
|
| CSP021015 |
ブラケット分離チューブ、規格は15mL（1本）
|
はい | 0.5-4mL | 25 | 100 |
| CSP021050 |
ブラケット分離チューブ、規格は50mL（1本）
|
はい | 4-17ml | 25 | 100 |
製品概要
製品情報
JET BIOFILのPBMC分離チューブは、内蔵された分離用ブラケットを特徴とする独自設計を採用しており、遠心分離時に目的サンプルと密度勾配媒体の混合を効果的に防ぎます。この設計により、単核細胞（MNC）は分離ブラケットの上層に保持され、チューブ底部にある赤血球や顆粒球層から分離されます。MNCは複雑な操作を必要とせずに容易に回収でき、従来の方法に比べて実験の手間を軽減し、貴重な時間を節約します。また、PBMC分離チューブは厳格にGMP（適正製造規範）基準に準拠しており、生物学的実験用消耗品としてより高い清浄度を満たしています。これにより、さまざまな実験用途に安心してご使用いただけます。
内蔵の分離ブラケットにより、最大限に試料と分離液の混合を減少し、試料をゆっくりと少しずつ密度勾配遠心液面に加える必要がありません
個包装タイプの3層清潔医療用外包装を採用し、さらに品質追跡のため、全ての最小包装にはロット番号が付いています
特徴
材質
注文情報
|
カタログ番号
|
説明
|
滅菌
|
未稀釈
|
点/袋
|
点/箱
|
| CSP021015 |
ブラケット分離チューブ、規格は15mL（1本）
|
はい | 0.5-4mL | 25 | 100 |
| CSP021050 |
ブラケット分離チューブ、規格は50mL（1本）
|
はい | 4-17ml | 25 | 100 |
よくあるご質問
* What is the maximum rotational speed that the centrifuge tubes of Jet Biofil can withstand?
21000xg. Due to the different center distance of the rotor shaft of different centrifuges, the centrifugal force generated at the same speed (rpm) is also different, so we usually use the relative centrifugal force (RCF) (g) to represent the tolerance degree of the centrifuge tube in the process of rotating centrifugation.
* Can the centrifuge tubes of Jet Biofil hold some kind of solution? How about its chemical compatibility?
It is necessary to pay attention to whether the sample is compatible with the material of the centrifuge tube as is used, especially if the sample is some chemical reagents or organic solvents, and the Chemical Compatibility Table of PP Plastic Materials can be used as reference. Samples with low or incompatible centrifugal compatibility are not recommended, and customers can also do pre-experiments to have a test.
* What is the possible reason for the burst of the centrifuge tubes in the process of centrifuge?
When centrifuging, it is necessary to pay attention to the chosen centrifugal force cannot exceed the maximum centrifugal force that the product itself can withstand.
Please notice that the maximum centrifugal force (RCF) that can be withstood may be decreased when the sample is centrifuged at low temperature or the sample is an organic solvent/volatile irritant.
* What should be pay attention to when using the centrifuge tubes to preserve the samples at a low temperature?
When the sample is preserved below 0 ℃, the applicability of the centrifuge tube is closely related to the composition of the solution and preservation conditions. The centrifuge tube cannot be placed on the foam support, nor the bottom of the tube is in contact with the thermal insulation materials. And please use a hollow support when preserving the samples at low temperature. Otherwise, as part of the centrifuge tube is protected by thermal insulation material, while the other part is not, the temperature difference of the overall tube body makes the tube prone to burst. In addition, please reserve a space of at least 10% of the total volume to avoid sample spillage or tube burst caused by volume expansion due to liquid solidification.
* Why the centrifuge tube smell special when its package is opened?
If you smell some odor in the product you receive, it is not because of the abnormal quality of the product. This is because some molecules will be vaporized and retained in the product/packaging in the process of high temperature injection molding/irradiation sterilization of the raw material plastic particles of centrifuge tube products.
The materials used for making the centrifuge tubes of Jet Biofil comply to the USP Class VI standards (USP Class VI Chapter<87>, "Biological reactivity Tests, in Vitro" and Chapter<88>, "Biological Reactivity Tests, in vivo”). No cytolysis or cytotoxic effects were observed through the verification. And the outgoing products in the process of quality inspection have passed various verification tests and are in line with the product release standards.
推薦製品
